Review

diameter ag agcl reference electrode (World Precision Instruments)

World Precision Instruments is a verified supplier

World Precision Instruments manufactures this product

About

News

Press Release

Team

Advisors

Partners

Contact

Bioz Stars

Bioz vStars

Buy from Supplier

Structured Review

World Precision Instruments diameter ag agcl reference electrode
Diameter Ag Agcl Reference Electrode, supplied by World Precision Instruments, used in various techniques. Bioz Stars score: 93/100, based on 122 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/ag+agcl+reference+electrodes/Dri-Ref+Reference+Electrode/pm41925011-83-19-24
Average 93 stars, based on 122 article reviews

diameter ag agcl reference electrode - by Bioz Stars, 2026-11

93/100 stars

Images

Synthesized:

Article Title: Monitoring the Orientational Changes of Alamethicin during Incorporation into Bilayer Lipid Membranes
Article Snippet: Antimicrobial peptides (AMPs) are the first line of defense after contact of an infectious invader, e.g. bacterium or virus, with a host and an integral part of the innate immune system of humans.. Their broad spectrum of biological functions ranges from cell membrane disruption over facilitation of chemotaxis to interaction with membrane-bound or intracellular receptors, thus providing novel strategies to overcome bacterial resistances.. Especially, the clarification of the mechanisms and dynamics of AMP incorporation into bacterial membranes is of high interest and different mechanistic models are still under discussion.

other:

Article Title: Real-time soil and groundwater monitoring via spatial and temporal resolution of biogeochemical potentials.
Article Snippet: Oxidation-reduction potentials (ORP) govern the transformation of organic compounds in water and soils.. Standard methods for measurements of ORPs in subsurface setting are deeply flawed due to heterogeneous samples from wells, failure to capture weakly poised redox couples, and biases with ex-situ measurements.. In this study, we developed a real-time in-situ ORP sensor system that continuously measures biogeochemical electrical potentials using vertically distributed point sensing electrodes in direct contact with the soil.

Article Title: Development and Microfabrication of Next Generation Biosensors for Nucleic Acids and Neurotransmitters
Article Snippet: 150 SYLGARD 184 for fabricating polydimethylsiloxane (PDMS) wells was from Dow Corning Corporation (Midland, MI).

Article Title: On the Use of Scalable NanoISFET Arrays of Silicon with Highly Reproducible Sensor Performance for Biosensor Applications
Article Snippet: Ag/AgCl reference electrodes (DRIREF-450) were bought from World Precision Instruments.

Membrane:

Article Title: An anion exchange membrane sensor detects EGFR and its activity state in plasma CD63 extracellular vesicles from patients with glioblastoma
Article Snippet: .. The current was supplied through the two platinum electrodes, while the potential across the membrane was measured using Ag/AgCl reference electrodes (World Precision Instruments, USA). ..

Tissue:

Article Title: Implantable aptamer–field-effect transistor neuroprobes for in vivo neurotransmitter monitoring
Article Snippet: Brain tissue was homogenized in ice-cold aCSF [1:1 (w/v)] using a VirTis Virsonic 600 ultrasonic cell disruptor (Gardiner, NY) with the microtip set at 4 with 50% duty for 30 to 40 1-s pulses. .. Commercially available Ag/AgCl reference electrodes (Super Dri-Ref, World Precision Instruments Inc., Sarasota, FL) were placed in the tissue homogenates above the FETs. .. All FET measurements, including the in vivo measurements described below, were performed using a Keithley 4200A-SCS (Tektronix, Beaverton, OR) semiconductor analyzer.

Image Search Results

Structure of a conventional Ag/AgCl reference electrode in a KCl saturated solution .

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Structure of a conventional Ag/AgCl reference electrode in a KCl saturated solution .

Article Snippet: A leak-free Ag/AgCl reference electrode (purchased at Microelectrodes Inc., Bedford, NH, USA) installed at the inlet tube assures measurement against a stable liquid potential ( a,b) [ ].

Techniques:

( a ) Optical image of a wafer piece after electron beam lithography of the nanowires. The samples are arranged in 2 × 2 squares. Each sample consists of 48 nanowire FETs. Light areas are the nanowires and contact leads, while dark areas are the buried oxide. ( b ) Sample after bonding into a chip carrier. ( c ) SEM image of three nanowires (thin horizontal lines) with contact areas on the left (source) and a common bus line on the right (drain). ( d ) Cross-section of the fabricated device and a sketch of the measurement setup (not to scale). The liquid is delivered to the custom-made PDMS microchannels by a pump (indicated by arrows). A flow-through Ag/AgCl reference electrode is integrated in the Teflon (PTFE) tubing close to the microchannel. The working point of the nanowire transistor is adjusted by two voltages: a back-gate voltage Vbg (applied to the handle wafer) and a liquid-gate voltage Vref (applied to the reference electrode). Reprinted with permission from Reference . Copyright © 2012 American Chemical Society.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( a ) Optical image of a wafer piece after electron beam lithography of the nanowires. The samples are arranged in 2 × 2 squares. Each sample consists of 48 nanowire FETs. Light areas are the nanowires and contact leads, while dark areas are the buried oxide. ( b ) Sample after bonding into a chip carrier. ( c ) SEM image of three nanowires (thin horizontal lines) with contact areas on the left (source) and a common bus line on the right (drain). ( d ) Cross-section of the fabricated device and a sketch of the measurement setup (not to scale). The liquid is delivered to the custom-made PDMS microchannels by a pump (indicated by arrows). A flow-through Ag/AgCl reference electrode is integrated in the Teflon (PTFE) tubing close to the microchannel. The working point of the nanowire transistor is adjusted by two voltages: a back-gate voltage Vbg (applied to the handle wafer) and a liquid-gate voltage Vref (applied to the reference electrode). Reprinted with permission from Reference . Copyright © 2012 American Chemical Society.

Techniques:

( a ) Sensor concept with fluidic channel above nanowire region and realization of inlet and outlet flow. ( b ) Real fluid cell setup with contacted source and drain and PDMS channel for sample delivery as labeled, and position of the Ag/AgCl reference electrode. Microchips are of approximately 2 × 2 cm 2 . Reprinted from Ref. . Available under CC BY 4.0 license.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( a ) Sensor concept with fluidic channel above nanowire region and realization of inlet and outlet flow. ( b ) Real fluid cell setup with contacted source and drain and PDMS channel for sample delivery as labeled, and position of the Ag/AgCl reference electrode. Microchips are of approximately 2 × 2 cm 2 . Reprinted from Ref. . Available under CC BY 4.0 license.

Techniques: Labeling

A cross-sectional schematic image of a dual-gate (DG) ISFET. The designed active channel length and width are 10 µm and 10 µm, respectively. The thicknesses of the top active Si layer and of the BOx are 4.3 nm and 224 nm, respectively. A top SiO 2 layer with a thickness of 23 nm is grown by thermal oxidation for the sensing membrane. A commercial Ag/AgCl reference electrode is used for various pH buffer solutions. Reprinted from Ref. . Available under CC BY 4.0 license.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: A cross-sectional schematic image of a dual-gate (DG) ISFET. The designed active channel length and width are 10 µm and 10 µm, respectively. The thicknesses of the top active Si layer and of the BOx are 4.3 nm and 224 nm, respectively. A top SiO 2 layer with a thickness of 23 nm is grown by thermal oxidation for the sensing membrane. A commercial Ag/AgCl reference electrode is used for various pH buffer solutions. Reprinted from Ref. . Available under CC BY 4.0 license.

Techniques: Membrane

( a ) FESEM image of a Si NWFET with a microwell ( left ), and schematics for measuring the readout current for stabilization of the sample solution potential with a reference electrode ( right ). ( b ) Use of three reference electrodes for comparative study: ( i ) SCE-saturated calomel reference electrode, ( ii ) Ag/AgCl reference electrode in saturated KCl solution tube, and ( iii ) integrated reference electrode on chip with Ag/AgCl ink. The dimensions are a 5 nm thick top oxide and a 20 nm thick channel Si NW on a 145 nm thick BOx layer. The length channel is 2 µm. The chip size is about 5 × 7 mm. Reprinted from Ref. . Available under CC BY 4.0 license.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( a ) FESEM image of a Si NWFET with a microwell ( left ), and schematics for measuring the readout current for stabilization of the sample solution potential with a reference electrode ( right ). ( b ) Use of three reference electrodes for comparative study: ( i ) SCE-saturated calomel reference electrode, ( ii ) Ag/AgCl reference electrode in saturated KCl solution tube, and ( iii ) integrated reference electrode on chip with Ag/AgCl ink. The dimensions are a 5 nm thick top oxide and a 20 nm thick channel Si NW on a 145 nm thick BOx layer. The length channel is 2 µm. The chip size is about 5 × 7 mm. Reprinted from Ref. . Available under CC BY 4.0 license.

Techniques:

( left ) Cross-sectional schematic of Si NWFETs with standard commercial Ag/AgCl reference electrode, and SEM images ( right ) showing ultra-scaled opening access with diameter dimensions ranging from 250 nm down to 120 nm on top of the Si NW array. The latter is made up of 15 Si NWs, each with a 50 nm width. Reprinted from Ref. . Available under CC BY 4.0 license.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( left ) Cross-sectional schematic of Si NWFETs with standard commercial Ag/AgCl reference electrode, and SEM images ( right ) showing ultra-scaled opening access with diameter dimensions ranging from 250 nm down to 120 nm on top of the Si NW array. The latter is made up of 15 Si NWs, each with a 50 nm width. Reprinted from Ref. . Available under CC BY 4.0 license.

Techniques:

Schematic of a whole miniaturized micro-reference electrode (µF). A Ag/AgCl wire electrode is connected to a microfluidic KCl channel (3 cm × 500 µm × 80 µm) embedded in PDMS. Reproduced from Refs. [ , ] with permission from the Chemical and Biological Microsystems Society (CBMS). Copyright (2010) CBMS.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Schematic of a whole miniaturized micro-reference electrode (µF). A Ag/AgCl wire electrode is connected to a microfluidic KCl channel (3 cm × 500 µm × 80 µm) embedded in PDMS. Reproduced from Refs. [ , ] with permission from the Chemical and Biological Microsystems Society (CBMS). Copyright (2010) CBMS.

Techniques:

Chip that integrates pseudo-Ag/AgCl REs, microfluidics, and sensing nanodevices: ( a ) optical image of the mounted microfluidics setup; ( b ) cartoon showing the cross-section of the Si Nanoribbon (NR)-ISFET coupled with the microfluidic module (not to scale). From bottom to top: (i) Si Nanoribbon (NR) chip; (ii) double-coated tape (the height of the channels is defined by the thickness of the tape, at 190 μm); (iii) PMMA cap as sealing polymer with the Ag/AgCl inlet and outlet tubes to avoid fluid leakages from the inlets/outlets . Reprinted with the permission of the authors.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Chip that integrates pseudo-Ag/AgCl REs, microfluidics, and sensing nanodevices: ( a ) optical image of the mounted microfluidics setup; ( b ) cartoon showing the cross-section of the Si Nanoribbon (NR)-ISFET coupled with the microfluidic module (not to scale). From bottom to top: (i) Si Nanoribbon (NR) chip; (ii) double-coated tape (the height of the channels is defined by the thickness of the tape, at 190 μm); (iii) PMMA cap as sealing polymer with the Ag/AgCl inlet and outlet tubes to avoid fluid leakages from the inlets/outlets . Reprinted with the permission of the authors.

Techniques: Polymer

( a ) Schematic diagram of a multi-SiNW bioFETs with an integrated PDMS fluidic channel, Ag/AgCl wire as a solution gate, and Si substrate as a back-gate. ( b ) Image of an assembled multi-SiNW FET sensing platform. Reprinted with permission from Reference . Copyright © 2011 Royal Society of Chemistry.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( a ) Schematic diagram of a multi-SiNW bioFETs with an integrated PDMS fluidic channel, Ag/AgCl wire as a solution gate, and Si substrate as a back-gate. ( b ) Image of an assembled multi-SiNW FET sensing platform. Reprinted with permission from Reference . Copyright © 2011 Royal Society of Chemistry.

Techniques:

Planar pseudo-reference electrode integrated on the Si NW-based ISFET chip: ( a ) after the Ag/AgCl layer deposition; ( b ) after the 2 µm thick SU-8 layer passivation on the chip, except for the active sensing region and the contact pads, to prevent leakage current between the contacts and the solution. The BOx thickness is 200 nm. The Si NW has a thickness of 40 nm thick, width of 50 nm, and length of 10 µm. The gate oxide is 5 nm thick. The width, length, and height of the well holding the solution over the devices are 1200 µm, 1200 µm, and 2 µm, respectively. The width and length of the pseudo-Ag/AgCl reference electrode are 1000 µm and 1000 µm, respectively (thickness not described). Reprinted with permission from Reference . Copyright © 2011 Royal Society of Chemistry.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Planar pseudo-reference electrode integrated on the Si NW-based ISFET chip: ( a ) after the Ag/AgCl layer deposition; ( b ) after the 2 µm thick SU-8 layer passivation on the chip, except for the active sensing region and the contact pads, to prevent leakage current between the contacts and the solution. The BOx thickness is 200 nm. The Si NW has a thickness of 40 nm thick, width of 50 nm, and length of 10 µm. The gate oxide is 5 nm thick. The width, length, and height of the well holding the solution over the devices are 1200 µm, 1200 µm, and 2 µm, respectively. The width and length of the pseudo-Ag/AgCl reference electrode are 1000 µm and 1000 µm, respectively (thickness not described). Reprinted with permission from Reference . Copyright © 2011 Royal Society of Chemistry.

Techniques:

Electrochemical sensor structure and characterization of a Ag/AgCl/Nafion reference electrode (RE). ( a ) Photo of a miniaturized, two-electrode setup, including a working electrode (WE) and an RE. ( b ) Schematic illustration of the cross-sectional view of the structural interface of the newly fabricated, all-solid-state Ag/AgCl/Nafion. ( c , d ) Cross-sectional SEM images that capture the layered structure of Ag/AgCl electrodes formed up to 10 cyclic voltammetry cycles ( c ) and the porous structure of primary AgCl nanoparticles ( d ). Reprinted with permission from Reference . Copyright © 2020 Elsevier.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Electrochemical sensor structure and characterization of a Ag/AgCl/Nafion reference electrode (RE). ( a ) Photo of a miniaturized, two-electrode setup, including a working electrode (WE) and an RE. ( b ) Schematic illustration of the cross-sectional view of the structural interface of the newly fabricated, all-solid-state Ag/AgCl/Nafion. ( c , d ) Cross-sectional SEM images that capture the layered structure of Ag/AgCl electrodes formed up to 10 cyclic voltammetry cycles ( c ) and the porous structure of primary AgCl nanoparticles ( d ). Reprinted with permission from Reference . Copyright © 2020 Elsevier.

Techniques:

( a ) Schematic representation illustrating a planar Ag/AgCl pseudo-reference electrode obtained by 3D printing. Reprinted from Reference , available under CC BY-NC-ND license. ( b ) Photo of the first fabricated full-ink-jet-printed solid-state reference electrode on a 125 µm thick polymeric (polyethylene terephthalate–PET) film substrate. Reprinted with permission from Reference , Copyright © 2019 American Chemical Society. ( c ) Photo of a wearable flexible integrated sensing array (FISA) on a subject’s wrist, integrating the multiplexed sweat electrochemical sensor array and the wireless flexible printed circuit board (FPCB). Reproduced from with permission from the SNCSC.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( a ) Schematic representation illustrating a planar Ag/AgCl pseudo-reference electrode obtained by 3D printing. Reprinted from Reference , available under CC BY-NC-ND license. ( b ) Photo of the first fabricated full-ink-jet-printed solid-state reference electrode on a 125 µm thick polymeric (polyethylene terephthalate–PET) film substrate. Reprinted with permission from Reference , Copyright © 2019 American Chemical Society. ( c ) Photo of a wearable flexible integrated sensing array (FISA) on a subject’s wrist, integrating the multiplexed sweat electrochemical sensor array and the wireless flexible printed circuit board (FPCB). Reproduced from with permission from the SNCSC.

Techniques:

Normalized sensitivity value (ΔI/I0) according to the variation in pH concentration resulting from measurements of the real-time average value of Ids measured with two similar sensors and with three different reference electrodes: SCE-saturated calomel reference electrode, Ag/AgCl electrode (tube type), and integrated Ag/AgCl (ink) electrode. Reprinted from Ref. . Available under CC BY 4.0 license.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Normalized sensitivity value (ΔI/I0) according to the variation in pH concentration resulting from measurements of the real-time average value of Ids measured with two similar sensors and with three different reference electrodes: SCE-saturated calomel reference electrode, Ag/AgCl electrode (tube type), and integrated Ag/AgCl (ink) electrode. Reprinted from Ref. . Available under CC BY 4.0 license.

Techniques: Concentration Assay

( a ) Schematic of protein sensing with a Si-nanograting FET (NGFET) and dual Ag/AgCl electrodes. The oxide–electrolyte surface of the nanograting is functionalized with antibody. The FET is biased in subthreshold region by a solution gate at the top of the fluidic channel. The other electrode monitors the bulk solution potential. ( b ) Optical image and ( c ) electron micrograph of a typical Si NGFET with 100 nanowires in the grating. Each nanowire is 50 nm in width, 30 nm in height, and 20 µm in length. ( d ) Three-dimensionally printed clamp for protein sensing with dual Ag/AgCl electrodes. ( e ) Species at the gate oxide surface after modification with TESU, antibody (mouse IgG), and passivation (with BSA). The corresponding antigen used in this study is anti-mouse IgG with gold. Reprinted with permission from Reference . Copyright © 2014 IEEE.

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: ( a ) Schematic of protein sensing with a Si-nanograting FET (NGFET) and dual Ag/AgCl electrodes. The oxide–electrolyte surface of the nanograting is functionalized with antibody. The FET is biased in subthreshold region by a solution gate at the top of the fluidic channel. The other electrode monitors the bulk solution potential. ( b ) Optical image and ( c ) electron micrograph of a typical Si NGFET with 100 nanowires in the grating. Each nanowire is 50 nm in width, 30 nm in height, and 20 µm in length. ( d ) Three-dimensionally printed clamp for protein sensing with dual Ag/AgCl electrodes. ( e ) Species at the gate oxide surface after modification with TESU, antibody (mouse IgG), and passivation (with BSA). The corresponding antigen used in this study is anti-mouse IgG with gold. Reprinted with permission from Reference . Copyright © 2014 IEEE.

Techniques: Modification

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Figure Lengend Snippet: Structure of a conventional Ag/AgCl reference electrode in a KCl saturated solution .

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques: Labeling

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques: Membrane

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques: Polymer

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques: Concentration Assay

Journal: Sensors (Basel, Switzerland)

Article Title: On the Use of Ag/AgCl Reference Electrode in Silicon Nanowire Field Effect Transistors for pH and Biosensing Applications

doi: 10.3390/s26030857

Article Snippet: A standard commercial Ag/AgCl reference electrode was used (Micro-Dri-Ref, 450 μm diameter from World Precision Instruments).

Techniques: Modification

Review

diameter ag agcl reference electrode (World Precision Instruments)

Structured Review

Images

Related Articles

Synthesized:

other:

Membrane:

Tissue:

Similar Products

Image Search Results